Power M35 41A Push Lock Cable end Female (Field Installable)
代碼 GT1E1410-42032
Specifications:
Current Rating: 41A
Temperature Range: -40° / +105°
IP Rating: IP 67
Current Rating: 41A
Temperature Range: -40° / +105°
IP Rating: IP 67
| Material | |
|---|---|
| Housing | PA66 |
| Contacts | Copper Alloy， Au Plating |
| Hex Nut / Gland Nut / Clamp | PA66 |
| Gasket / O-Ring | Silicone |
| Gland | NBR |
| Machine Screw | S15C |
| Terminal | Beryllium Copper， Sn Plating |
| Technical Data | |
| Characteristics | Description |
| Visual and Dimensional Inspection | Must meet or exceed the requirements specified by the most current version of the Power Specification. |
| Insulation Resistance | DC500V±10%‚ test for 1 minute and the insulation resistance should be more than 100MΩ |
| Dielectric Withstanding Voltage | 2500 V DC/AC peak， contact-to-contact， for 1 minute. |
| Contact Resistance | 10mΩ at 10mA Max. |
| Durability | 200 cycles insertion/extraction cycles at a maximum rate of 500cycles per hour. |
| Cable Pull-Out | After the application of a steady state axial load of 45 N for one minute. |
| Machine Screw Force | Insert stripped wire into screw-in pin， tighten. [2.0 Nm]min. |
| Physical Shock | No discontinuities of 1 μs or longer duration when mated Power connectors are subjected to 11 ms duration 30 Gs half-sine shock pulses. Three shocks in each direction applied along three mutually perpendicular planes for a total of 18 shocks. |
| Random Vibration | The electrical load conditions shall be 100mA maximum for all contacts. Frequency: 50 to 2000 Hz PDS: 0.04 g? /Hz. Duration: 1 Hour/Axis， 3 Axes Total. g’s: 7.56 g rms |
| Thermal Shock | 5 cycles at -40° / +105°，after the test， the function and appearance can't be impacted. |
| Humidity Life | 96 hours minimum (seven step cycles). |
| Salt Spray | The test liquid (Nacl) thickness is 5%， Compressing the air pressure is 0.083Mpa， Spraying amount is 1~2 ml/80cm/h， Temperature of the pressure barrel is 43°， LAB temperature is 35°， relative humidity of LAB is 95%~98%， test time is 48 hours， after the test， check if there is rusty and oxidized phenomenon. |
| Waterproof Test | Submersion in water 1 meter for 30 minutes. |
| Temperature Life | 85° for 48Hours Method A， Mated |
| Cycling Humidity | 4 cycles at 25° / +85° 95% RH (1 cycles/day) |
| UV Exposure | 24 H equal 1 year 8 h UV at 70 (±3) ° Black Panel Temperature 4 h Condensation at 50 (±3) ° Black Panel Temperature |
