PowerM3541APushLockPanelMountMale代碼GT1E140142030Specifications:CurrentRating:41ATemperatureRange:40°+105°IPRating:IP67Downlo">

Power M35 41A Push Lock Panel Mount Male

代碼 GT1E1401-42030

Specifications:
Current Rating: 41A
Temperature Range: -40° / +105°
IP Rating: IP 67

Material
Housing PA66
Contacts Copper Alloy, Au Plating
Hex Nut / Gland Nut / Clamp PA66
Gasket / O-Ring Silicone
Gland NBR
Machine Screw S15C
Terminal Beryllium Copper, Sn Plating
Technical Data
Characteristics Description
Visual and Dimensional Inspection Must meet or exceed the requirements specified by the most current version of the Power Specification.
Insulation Resistance DC500V±10%‚ test for 1 minute and the insulation resistance should be more than 100MΩ
Dielectric Withstanding Voltage 2500 V DC/AC peak, contact-to-contact, for 1 minute.
Contact Resistance 10mΩ at 10mA Max.
Durability 200 cycles insertion/extraction cycles at a maximum rate of 500cycles per hour.
Cable Pull-Out After the application of a steady state axial load of 45 N for one minute.
Machine Screw Force Insert stripped wire into screw-in pin, tighten. [2.0 Nm]min.
Physical Shock No discontinuities of 1 μs or longer duration when mated Power connectors are subjected to 11 ms duration 30 Gs half-sine shock pulses. Three shocks in each direction applied along three mutually perpendicular planes for a total of 18 shocks.
Random Vibration The electrical load conditions shall be 100mA maximum for all contacts.
Frequency: 50 to 2000 Hz
PDS: 0.04 g? /Hz.
Duration: 1 Hour/Axis, 3 Axes Total.
g’s: 7.56 g rms
Thermal Shock 5 cycles at -40° / +105°,after the test, the function and appearance can't be impacted.
Humidity Life 96 hours minimum (seven step cycles).
Salt Spray The test liquid (Nacl) thickness is 5%, Compressing the air pressure is 0.083Mpa, Spraying amount is 1~2 ml/80cm/h, Temperature of the pressure barrel is 43°, LAB temperature is 35°, relative humidity of LAB is 95%~98%, test time is 48 hours, after the test, check if there is rusty and oxidized phenomenon.
Waterproof Test Submersion in water 1 meter for 30 minutes.
Temperature Life 85° for 48Hours Method A, Mated
Cycling Humidity 4 cycles at 25° / +85° 95% RH (1 cycles/day)
UV Exposure 24 H equal 1 year
8 h UV at 70 (±3) ° Black Panel Temperature
4 h Condensation at 50 (±3) ° Black Panel Temperature