Push Lock S3 10A 4P Field Installable Cable End Female Crimp

代碼 GT261310-1404X

Current Rating: 10A
AWG Gauge: 16 AWG ~ 20 AWG
Voltage: 250V AC/DC
Temperature Range: -25° / +85°
IP Rating: IP 68
Housing/Base/Cage PA66
Body/Hex Nut/Push Nut/Holder/Cover/Gland Nut Copper Alloy
Metal Ball / Spring SUS
Contacts Copper Alloy With Au Plating
O-Ring/Gasket/Gland Silicone
Glue Epoxy
Technical Data
Characteristics Description
Visual and Dimensional Inspection Must meet or exceed the requirements specified by the most current version of the GT2611 Specification.
Insulation Resistance DC500V±10%‚ test for 1 minute and the insulation resistance should be more than 100MΩ
Withstanding Voltage 650 VAC between contacts , 650 VAC between contacts and metal-housing, for 1±5s min.
Contact Resistance 10mΩ at 10mA Max.
Pin Pull Test 1. Initial: 24 N minimum.
2. After Test: 16 N minimum.
Durability 2000 cycles insertion/extraction cycles at a maximum rate of 200cycles per hour.
Physical Shock No discontinuities of 1 μs or longer duration when mated are subjected to 11 ms duration 30 Gs half-sine shock pulses. Three shocks in each direction applied along three mutually perpendicular planes for a total of 18 shocks.
Random Vibration The electrical load conditions shall be 100mA maximum for all contacts.
Frequency: 50 to 2000 Hz
PDS: 0.04 g? /Hz.
Duration: 1 Hour/Axis, 3 Axes Total.
g’s: 7.56 g rms
Thermal Shock 5 cycles at -40° / +105°, after the test, the function and appearance can't be impacted.
Humidity Life 96 hours minimum (seven step cycles).
Salt Spray The test liquid (Nacl) thickness is 5%, Compressing the air pressure is 0.083Mpa, Spraying amount is 1~2 ml/80cm/h, Temperature of the pressure barrel is 43°, LAB temperature is 35°, relative humidity of LAB is 95%~98%, test time is 48hours, after the test, check if there is rusty and oxidized phenomenon.
Waterproof Test Submersion in water 1 meter for 24 hours.
Temperature Life 85° for 48Hours Method A, Mated
Cycling Humidity 4 cycles at 25° / +85° 95%RH (1 cycles/day)
UV Exposure 24Hr equal 1 year: Total require 3 years
8h UV at 70 (±3) ° Black Panel Temperature
4h Condensation at 50 (±3) ° Black Panel Temperature