Power M35 41A Push Lock Cable end Female (Field Installable)(GT1E1410-42032)

Home> Products>Power Series>M35 41A>Cable End Connector

Product

Power M35 41A Push Lock Cable end Female (Field Installable)

Product ID: GT1E1410-42032

The GT Contact (GTC) is best known for our waterproof related connectors like Ethernet, Circular, USB, Sensor and Power connector as well. The reason why we produce the waterproof products in such wide range is because we are confident in the quality and design capability.

This waterproof USB connector is applied to signal usage of PV inverter, outdoor LED display, marine, automation machine and IPC/Military NB. With such wide applications of the connector, the durability is also one of the key points we focus. Except for the fine quality materials, we also have tested our metal products in a 1M depth water environment for 24 hour to make sure its durability to water. If you are interested in our product, please feel free and contact with us for our fine quality waterproof USB connector today!

Specifications:

Current Rating: 41A
Temperature Range: -40°C / +105°C
IP Rating: IP 67

Material
Housing	PA66
Contacts	Copper Alloy, Au Plating
Hex Nut / Gland Nut / Clamp	PA66
Gasket / O-Ring	Silicone
Gland	NBR
Machine Screw	S15C
Terminal	Beryllium Copper, Sn Plating
Technical Data
Characteristics	Description
Visual and Dimensional Inspection	Must meet or exceed the requirements specified by the most current version of the Power Specification.
Insulation Resistance	DC 500V±10%, test for 1 minute and the insulation resistance should be more than100MΩ
Dielectric Withstanding Voltage	Power Pin: 2500 V AC contact-to-contact, for 1min.
Contact Resistance	10mΩ at 10mA Max.
Durability	200 cycles insertion/extraction cycles at a maximum rate of 500cycles per hour.
Cable Pull-Out	After the application of a steady state axial load of 45 N for one minute.
Machine Screw Force	Insert stripped wire into screw-in pin, tighten. [2.0 Nm]min.
Physical Shock	No discontinuities of 1 μs or longer duration when mated Power connectors are subjected to 11 ms duration 30 Gs half-sine shock pulses. Three shocks in each direction applied along three mutually perpendicular planes for a total of 18 shocks.
Random Vibration	The electrical load conditions shall be 100mA maximum for all contacts. Frequency: 50 to 2000 Hz PDS: 0.04 g² /Hz. Duration: 1 Hour/Axis, 3 Axes Total. g’s: 7.56 g rms
Thermal Shock	5 cycles at -40°C / +105°C, after the test, the function and appearance can't be impacted.
Humidity Life	96 hours minimum (seven step cycles).
Salt Spray	The test liquid (Nacl) thickness is 5%, Compressing the air pressure is 0.083Mpa, Spraying amount is 1~2 ml/80cm/h, Temperature of the pressure barrel is 43°C, LAB temperature is 35°C, relative humidity of LAB is 95%~98%, test time is 48 hours, after the test, check if there is rusty and oxidized phenomenon
Waterproof Test	Submersion in water 1 meter for 30 minutes.
Temperature Life	85°C for 48Hours Method A, Mated
Cycling Humidity	4 cycles at 25°C / +85°C 95% RH (1 cycles/day)
UV Exposure	24 H equal 1 year: 8 h UV at 70 (±3) °C Black Panel Temperature 4 h Condensation at 50 (±3) °C Black Panel Temperature