Power M35 41A Push Lock Cable end Male (Field Installable)

Power M35 41A Push Lock Cable end Male (Field Installable)
Product ID: GT1E1411-42032

Download Now !

  • Current Rating: 41A
  • Temperature Range: -40°C / +105°C
  • IP Rating: IP 67


Housing PA66
Contacts Copper Alloy, Au Plating
Hex Nut / Gland Nut / Clamp PA66
Gasket / O-Ring Silicone
Gland NBR
Machine Screw S15C
Terminal Beryllium Copper, Sn Plating
                                                                      Technical Data
Characteristics Description
Visual and Dimensional Inspection Must meet or exceed the requirements specified by the most current version of the Power Specification.
Insulation Resistance  DC 500V±10%, test for 1 minute and the insulation resistance should be more than100MΩ
Dielectric Withstanding Voltage Power Pin: 2500 V AC contact-to-contact, for 1min.
Contact Resistance  10mΩ at 10mA Max. 
Durability 200 cycles insertion/extraction cycles at a maximum rate of 500cycles per hour.
Cable Pull-Out After the application of a steady state axial load of 45 N for one minute.
Machine Screw Force Insert stripped wire into screw-in pin, tighten. [2.0 Nm]min.
Physical Shock No discontinuities of 1 μs or longer duration when mated Power connectors are subjected to 11 ms duration 30 Gs half-sine shock pulses. Three shocks in each direction applied along three mutually perpendicular planes for a total of 18 shocks.
Random Vibration  The electrical load conditions shall be 100mA maximum for all contacts.
Frequency: 50 to 2000 Hz
PDS: 0.04 g² /Hz.
Duration: 1 Hour/Axis, 3 Axes Total.
g’s: 7.56 g  rms
Thermal Shock  5 cycles at -40°C / +105°C, after the test, the function and appearance can't be impacted.
Humidity Life 96 hours minimum (seven step cycles). 
Salt Spray                      The test liquid (Nacl) thickness is 5%, Compressing the air pressure is 0.083Mpa, Spraying amount is 1~2 ml/80cm/h, Temperature of the pressure barrel is 43°C, LAB temperature is 35°C, relative humidity of LAB is 95%~98%, test time is 48 hours, after the test, check if there is rusty and oxidized phenomenon
Waterproof Test  Submersion in water 1 meter for 30 minutes.
Temperature Life 85°C for 48Hours Method A, Mated
Cycling Humidity 4 cycles at 25°C / +85°C 95% RH (1 cycles/day)
UV Exposure 24 H equal 1 year:
8 h UV at 70 (±3) °C Black Panel Temperature
4 h Condensation at 50 (±3) °C Black Panel Temperature