Thank you for visiting our website. Your personal privacy is absolutely respected and protected by the website. To help you understand how the website collects, uses and protects your personal information, be sure to read the website "Privacy Policy". Thank you!
ACCEPT AND PROCEED

製品

Push Lock M16 4A Panel (Rear)

Push Lock M16 4A Panel (Rear)

Push Lock M16 4A Panel (Rear)

商品番号: GT261100-03050

 

GT Contact (GTC) is a reliable manufacturer who supplies various connectors with excellent quality. Moreover, our rugged waterproof technology brings out the advantages among other competitors. So the waterproof connector is surely the state-of-the-art product from our company. 

The Waterproof Sensor Connectors apply to signal and small-current power usage of wireless outdoor AP, outdoor LED display and lighting, outdoor lamp, and automation machine. With strict quality monitoring, we are ready to present you our best products. Except for the fine quality materials, we also have tested our metal products in a 1M depth water environment for 24 hour to make sure its durability to water. Please do not hesitate and contact with us for our product today!

  • Current Rating: 4.0A 
  • AWG Gauge: 20 AWG ~ 24 AWG
  • Voltage:

- 2-4 pin: 250V AC/DC 
- 5 pin: 60V AC/DC

  • Temperature Range: -25°C / +85°C
  • Ingress Protection Rate : IP 68


 

 

Material
Housing/Base/Cage PA66
Body/Hex Nut/Push Nut/Holder/Cover/Gland Nut Copper Alloy
Metal Ball / Spring SUS
Contacts Copper Alloy With Au Plating
O-Ring/Gasket/Gland Silicone
Glue Epoxy
Technical Data
Characteristics Description
Visual and Dimensional Inspection Must meet or exceed the requirements specified by the most current version of the GT2611 Specification.
Insulation Resistance DC500V±10%,test for 1 minute and the insulation resistance should be more than100MΩ
Withstanding Voltage 650 VAC between contacts , 650 VAC between contacts and metal-housing, for 1±5s min.
Contact Resistance 10mΩ at 10mA Max.
Pin Pull Test 1.Initial: 24 N minimum.
2. After Test: 16 N minimum.
Durability 2000 cycles insertion/extraction cycles at a maximum rate of 200cycles per hour.
Physical Shock No discontinuities of 1 μs or longer duration when mated are subjected to 11 ms duration 30 Gs half-sine shock pulses. Three shocks in each direction applied along three mutually perpendicular planes for a total of 18 shocks.
Random Vibration The electrical load conditions shall be 100mA maximum for all contacts.
Frequency: 50 to 2000 Hz
PDS: 0.04 g² /Hz.
Duration: 1 Hour/Axis, 3 Axes Total.
g’s: 7.56 g rms
Thermal Shock 5 cycles at -40°C / +105°C, after the test, the function and appearance can't be impacted.
Humidity Life 96 hours minimum (seven step cycles).
Salt Spray The test liquid (Nacl) thickness is 5%, Compressing the air pressure is 0.083Mpa, Spraying amount is 1~2 ml/80cm/h, Temperature of the pressure barrel is 43°C, LAB temperature is 35°C, relative humidity of LAB is 95%~98%, test time is 48hours, after the test, check if there is rusty and oxidized phenomenon.
Waterproof Test Submersion in water 1 meter for 24 hours.
Temperature Life 85°C for 48Hours Method A, Mated
Cycling Humidity 4 cycles at 25°C / +85°C 95%RH (1 cycles/day)
UV Exposure 24Hr equal 1 year: Total require 3 years
8 h UV at 70 (±3) °C Black Panel Temperature
4 h Condensation at 50 (±3) °C Black Panel Temperature